Over-speed Alarm: Set a maximum speed in advance, if the device’s real speed is over, it will send alarm message.
Geo-fence: Set a district as safe area, the device will send alarm messages to APP and web server when it goes inside / outside that area.
Real-time Tracking: The device supports dual positioning ways: GPS + LBS, which enables to get the location in real-time.
History Route Playback: The data can be saved on the server for 90 days. And before that, the data will be eliminated automatically. You can check the history route for any day during the period.
Long standby time up to around 120 hours.
SOS Alarm: One button send alarm for help.
Low battery Alarm: When the tracker power is lower than the warning line, it will send an alarm message to remind the charge.
Setup the GPS Tracker and Network
If use NB-loT SIM Card, ONLY can setup the device via USB confi cable (because NB-loT SIM don’t support SMS)
If use Cat M1 SIM Card, can setup the device via SMS Commands.
1.Set APN (Text command format): apn,apn content,,# or apn,apn content,username,password# is there are username,password.
Text command format: data,ip:port# (for example: data,126.96.36.199:7700#)
3.Setup Network mode (If you use GSM Network, the ignore this step):
Set Cat M1 Network: send text command format: netlock,2,3,0#
Set NB-loT Network: send text command format: netlock,3,3,1#
Step1: Install SIM Card
Get ready a Nano SIM Card that supports Cat M1 or NB-loT with 30MB data a month.
Open the waterproof rubber plug
Insert SIM Card to SIM Card Slot Correctly ( as following picture)
Step2: Press SOS button for 3 seconds to power on (Green LED will blink)
Press SOS button for 3 seconds to power off ( Green LED off)