Software Display:
Click on this website: www.tracksolid.com , then register your username and password and finally log in, add a device.
Mobile application: Scan the qr-code inside the image, download the software, Log in with the id / imei number, original password 123456, you can change the password after logging in.
Main Features:
*Mediatek Intelligence Chipset
AT1 asset GPS Tracker adopt high-performance processing chipset–MTK2503A. While reducing the power consumption by as large margin, the accuracy of positioning is greatly increased. Let you enjoy a more accurate life.
*GPS+LBS+WIFI positioning
AT1 has three positioning methods. We sometimes enter the blind zone of gps, such as indoors and suburbs. At this time, there is no gps signal, and only LBS can be used for positioning. However, this positioning is not accurate. Therefore, the advantage of AT1 is that there is wifi positioning, so No matter where we are, we can understand our location information.
*Strong magnetic
AT1 is equipped with strong magnets for easy installation and is not easy to lose. It is suitable for a variety of cars, such as: cars, trucks, buses, etc.
*25 days long time standby
AT1 has 25 days of standby time, super convenient, no need to recharge frequently, this function is really great for long-distance transportation and baggage check-in.
* Voice Monitoring
We can use preset SOS number to send command MONITOR# to our AT1. Our AT1 will reply “OK” and call the SOS number. After the call connected, our AT1 will enter monitor condition. We can hear the sound around the teminal.
*Tamper Alert
Alert will be sent if out AT1 is disassembled or removed. In standby mode, alert message will be uoloaded and tracking mode will be activated for 20 minutes if device dis-assembly is detected. After 20 minutes, our AT1 enters into ultra-long standby mode.
*Sound Alarm
When the noise is above 60 decibels around our AT1 , our AT1 will automatic send alarm to the pre-set SOS numbers. SMS command to set sound alarm: SODALM,A,M,N,P,Q#
*Vibration Alert
Our AT1 have a 3D acceleration sensor. When an abnormality occurs in your cars, for example, if someone collide, smash or scratch the car. Our AT1 will send a alarm to find the corresponding person in time.
*IP67 water-proof
AT1 has a powerful waterproof function that can be used for outskirts and ship transport.Waterproofing is very important. This feature allows our equipment to be used in rainy weather and in the muddy suburbs.
Specifications
Caution & Notice
1. SOS number should be preset if you are willing to receive alert message.
2. If put indoors or covered, the device may be unable to locate, please take it to open field.
3. Use of the device in the fire or water is strongly prohibited.
4. Do not bend or disassemble the battery and the device.
5. Please use the original battery. The warranty will be invalid by using any other accessory. The manufacturer will not take any responsibility for any damage caused by not using the original battery.
Package Included:
1.original box
Real customer reviews